Top Mount VS Undermount Sink: Which One is Better

A sink is an essential piece of equipment at home. It is practical, functional, and convenient. There are several types of sinks you can find on the market. For this reason, you can quickly get confused to find which one is best. Once you have decided to buy a sink, the next question is to determine which one suits your space and personality. This article focuses on everything you need to know about the top mount and undermount sink.

Top mount Sink VS Undermount Sink

A top mount sink, also known as a drop-in sink, has a lip above the bench top. You will easily notice the lip edge of the sink. This means that it sits above the benchtop.
	The undermount sink has a lip below the bench top. It hangs onto the bench top, unlike the top mount that sits on top. Therefore, the undermount sink has an edge below the countertop.

How to install different sink 

Let's look at the proper ways to install the different sinks:

Top Mount Sink Installation Steps:

• Position the sink's cutting template. Ensure the edges of the template are square with the countertop.

• Once the fixture is in place, check whether there are obstructions that may interfere with the plumbing

• Put the template in position and determine the cutting line using a pencil.

• On the cutout part of the template, drill a half-inch hole inside one corner.

• Outside and inside the cutout lines, put masking tape along with them.

• Cut along the template lines with a saw.

• Apply caulk on the countertop surface.

• Put the sink on the cutout and press.

• Tighten the screws and wipe away excess caulk.

Undermount Sink Installation Steps:

• On a soft surface, turn the vanity top upside down.

• Position the fixture on the cutout.

• On the vanity top, draw the sink's outline.

• Remove the sink and apply a generous bead of silicone.

• On the outline, put the sink upside down.

• Place sink wing bolts and clips.

• Flip the vanity top.

• Remove excess silicone.

Which is easier to clean with? 

While stainless steel sinks are durable, regular cleaning is important to maintain the appearance of your sink. In terms of cleaning the surface, an undermount sink is more accessible, unlike the counterpart. You can easily clean food crumbs and sweep water into the sink. Seams cleaning is simple, regularly checking the joins of the sink and benchtop.

A top mount sink has a lip that is a barrier when brushing dirt. However, you don't need to worry about dirt hiding in the gap at the bottom of the sink. If you're someone that hates cleaning and you'd instead just get out of the kitchen as soon as possible, you can look at getting a top mount sink.

Choosing sink manufacturer correctly

Dali is a professional sink manufacturer founded in 1998. We offer different types of sinks, including top-mount, undermount, and others. Moreover, our products are of high quality and come in different sizes and designs. Our R&D team has over 100 years of experience bringing the latest designs to the market. In addition to that, our products have obtained international certifications. Lastly, our production capacity allows us to produce an extra 2 million pieces.

Conclusion 

When designing your space, you need to pick different fixtures that complement each other. Whether you love stainless steel, composite, copper, or cast iron, the fixture will most likely be a top mount sink or an undermount sink. Therefore, there is no better sink than the other. The choice will depend on your uses, styling, and what meets your lifestyle.

That said, the most important thing is to find a quality sink for maximum functionality. If you plan to install or update your fixture, Dali is one of the best sink manufacturers. We pride ourselves on delivering quality and customized fixtures to our customers. For any queries or get a quote, visit our website here at Dali.